Lightweight
Aluminum Construction
Compact Storage - Stores Ready-To-Use - Positive Lock
Pin for Safety
8”x 8” Non-Slip Base - 2” Heavy Duty
Ratchet Strap with “C” Hook
Each Strut Extends from 27” to 87”
Quick:
The Kodiak strut stores in a ready-to-go configuration. Simply
add the appropriate extension, set the positive lock pin after
extending the rod, and attach the hook to the vehicle then
tighten the ratchet strap. Each Kodiak strut can be in place
and stabilizing the vehicle in less than one minute. Simple: The end attachment and extensions
can quickly be added or removed. Each Kodiak strut has only
one pin making it simple to set up. Each strut can be adjusted
from 27” up to 87”. Kodiak struts are designed
to be easy to use and quick to set up. Lightweight: Kodiak struts are made of a
lightweight aluminum alloy. The entire kit weighs less than
50 lbs. Similar steel kits can weigh up to 140 lbs.
The Kodiak Vehicle Stabilization System is a tensioned buttress
system for stabilizing side lying and overturned vehicles.
The simple design and rugged construction ensures that the
Kodiak VSS will operate under the worst conditions. Mud, dirt,
sand or water will not effect the tool’s operation.
The aluminum and steel construction make the struts durable
and lightweight. In fact, so lightweight that the entire two
strut system with extensions and carrying bag weighs only
49 lbs. Compare that to systems weighing as much as 140 lbs.
The Kodiak System is designed for quick deployment and set
up. Simply remove a strut from the carrying bag, add an extension
if necessary, extend the adjusting rod, place the pre connected
ratchet belt and hook and tighten. The entire set up can be
done in less than one minute. The Kodiak Vehicle Stabilization
System will allow rescuers to stabilize a vehicle quickly
and efficiently.
The Kodiak Vehicle Stabilization System comes with two 27”
to 42” adjustable struts with 2” ratchet straps
and hooks. These are used in conjunction with 2-15”
extensions, 2-30” extensions and 2 multi-use heads.
These are used to create the “tensioned buttress”
used to stabilize the vehicle. The multi-use head is designed
to fit into frame holes, along flat edges and grip into sheet
metal. This aluminum head is anodized red to highlight the
contact point of the tensioned buttress. This head takes the
place of the many optional heads of other systems. With the
Kodiak System one head does the job every time. There is no
need to debate over which head should be used. The multi-use
head works in all situations. The positive lock pin on the
Kodiak System is designed to prevent accidental removal. A
button on the pin must be pushed in order to remove it from
the adjusting rod. The pin is easy to use even with gloves.
The positive lock pin is connected to the strut housing with
a PVC coated, stainless steel lanyard.
The
Capabear Claw Kit
The Capabear Claw Kit, designed by the originator of tensioned
buttress stabilization, provides stabilization for overturned
or side lying vehicles. This kit eliminates the need for
box cribbing in many situations. Variable lengths of 4x4’s
are used to create this tension buttress system, thereby
reducing the amount of cribbing needed for stabilization.
This system is designed to work with equipment already on
the rescue vehicle and requires less storage space than
most systems. The Capabear Claw Kit, designed by rescue
personnel for rescue personnel.
Capabear
Claw Kit Includes:
(2) Capabear Claws
(2) Capabear Gripper Tops
(2) Heavy Duty Straps C-hooks
(2) 4X4 Extender Sleeve
(1) Heavy Duty Carrying Bag
For
information on shipping and to place an order, Contact
Us at (856)589-2997.
Prices are subject to change without notice, some purchases
my require I.D
